5-Axis CNC Mill Machinist Lead, Orthopedic Implants | 1st Shift 5:00 AM to 1:30 PM (Hawthorne, CA)

𝗙𝗶𝗿𝘀𝘁 𝘀𝗵𝗶𝗳𝘁 𝗖𝗡𝗖 𝗺𝗶𝗹𝗹 𝗺𝗮𝗰𝗵𝗶𝗻𝗶𝘀𝘁 𝗹𝗲𝗮𝗱, 𝟱:𝟬𝟬 𝗔𝗠 𝘁𝗼 𝟭:𝟯𝟬 𝗣𝗠, 𝗰𝗹𝗼𝗰𝗸𝗲𝗱 𝗼𝘂𝘁 𝗯𝘆 𝗺𝗶𝗱-𝗮𝗳𝘁𝗲𝗿𝗻𝗼𝗼𝗻 𝗲𝘃𝗲𝗿𝘆 𝗱𝗮𝘆. 𝗨𝗽 𝘁𝗼 $𝟰𝟬 𝗽𝗲𝗿 𝗵𝗼𝘂𝗿 𝗱𝗲𝗽𝗲𝗻𝗱𝗶𝗻𝗴 𝗼𝗻 𝗲𝘅𝗽𝗲𝗿𝗶𝗲𝗻𝗰𝗲, 𝘄𝗶𝘁𝗵 𝗼𝘃𝗲𝗿𝘁𝗶𝗺𝗲 𝗼𝗻 𝘁𝗼𝗽 𝗼𝗳 𝘁𝗵𝗮𝘁.

𝗧𝗛𝗘 𝗦𝗛𝗢𝗣

Pave Talent is hiring for an ISO 13485 certified medical device machine shop in the South Bay. They machine titanium and stainless orthopedic implants, bone screws, and surgical instruments. Clean, climate-controlled floor running Fanuc-controlled 5-axis mills, vertical and horizontal, with Mastercam on the programming side.

𝗪𝗵𝗼 𝘁𝗵𝗿𝗶𝘃𝗲𝘀 𝗵𝗲𝗿𝗲

• Machinists who want to run the milling side of a shop, not just their own machine

• People who like true 5-axis work on tight-tolerance medical parts over high-volume production runs

• Anyone who wants the overtime rather than tolerates it, this shop runs 2 hours a day plus most Saturdays

If you are looking for a straight 40-hour week, or you have only run 3-axis production parts, this one is not for you.

𝗧𝗛𝗘 𝗢𝗣𝗣𝗢𝗥𝗧𝗨𝗡𝗜𝗧𝗬

• 1st shift, 5:00 AM to 1:30 PM, Monday through Friday

• A working lead seat, you set the standard on the floor, not from a desk

• 5-axis vertical and horizontal mills on Fanuc controls, some palletized

• Titanium and stainless implants and instruments held to medical tolerances

𝗪𝗛𝗔𝗧 𝗬𝗢𝗨 𝗪𝗜𝗟𝗟 𝗗𝗢

• Set up and run 5-axis mills, dial in fixturing, tooling, offsets, feeds and speeds

• Read blueprints and geometric dimensioning and tolerancing (GD&T) callouts on tight-tolerance parts

• Run first-piece and in-process inspection with micrometers, calipers, bore gauges, and a coordinate measuring machine (CMM)

• Troubleshoot finish, taper, and dimensional issues before they turn into scrap

• Guide and train the machinists on the mill side, set the bar for setups and documentation

• Edit programs at the control and make your own fixturing calls

𝗤𝗨𝗔𝗟𝗜𝗙𝗜𝗖𝗔𝗧𝗜𝗢𝗡𝗦

𝗥𝗲𝗾𝘂𝗶𝗿𝗲𝗱:

• 5+ years of CNC milling experience with hands-on 5-axis setup, simultaneous or 3+2

• Comfortable editing at a Fanuc control, not just running cycle start

• Strong blueprint and GD&T reading on tight-tolerance work

• Available for 1st shift and willing to commit to mandatory overtime, 2 hours daily plus 5 hours most Saturdays